GW Instek GDM-906 Series - Page 264

GDM-906X Series User Manual
264
CALCulate:MATH:PERCent
Sets the reference value for the Percent function.
Parameter: <NRf> | MIN | MAX | DEF
Example: CALC:MATH:PERC MAX
Sets the reference value for the Percent function to the maximum.
CALCulate:MATH:PERCent?
Returns the reference value setting for the Percent function.
Return parameter: <NRf>
CALCulate:TCHart[:STATe]
Turns the trend chart function on/off.
Parameter: 0 | 1 | ON | OFF
Example: CALC:TCH:STAT 0N
Turns the trend chart function on.
CALCulate:TCHart [:STATe]?
Returns the trend chart function state.
Return parameter: 0 | 1, 1=ON, 0=OFF
CALCulate:TRANsform:HISTogram[:STATe]
Turns the histogram function on/off.
Parameter: 0 | 1 | ON | OFF
Example: CALC:TRAN:HIST:STAT OFF
Turns the histogram function OFF.
CALCulate:TRANsform:HISTogram[:STATe]?
Returns the histogram function state.
Return parameter: 0 | 1, 1=ON, 0=OFF
CALCulate:TRANsform:HISTogram:ALL?
Returns all of the histogram calculation values.
Return parameter: lower limit, upper limit, total count and all of the
histogram data.
<1> <2> <3> <4>
histogram data: refer to “CALC:TRAN:HIST:DATA”
Example: SAMP:COUN 5
CALC:TRAN:HIST:POIN 100
CALC:TRAN:HIST:STAT ON
INIT
CALC:TRAN:HIST:ALL?
Returns: -1.37201300E-04,-1.17674251E-04,+8,+0………..+0
<1> <2> <3> <4>
CALCulate:TRANsform:HISTogram:CLEar[:IMMediate]
Clears all of the histogram calculation values.
Parameter: <None>
Example: CALC:TRAN:HIST:CLE:IMM