GW Instek GDM-906 Series - Page 302

GDM-906X Series User Manual
302
[SENSe:]TEMPerature:RJUNction:SIMulated
Sets temperature simulation value of thermocouple measurement.
Parameter: <NRf> (-20.00 ~ 80.00) | MIN | MAX | DEF
Example: SENS:TEMP:RJUN:SIM 25.00
Sets the thermocouple junction temperature to 25˚C.
[SENSe:]TEMPerature:RJUNction:SIMulated?
Returns temperature simulation value of thermocouple measurement.
Return parameter: <NRf> (-2.00000000E+01~+8.00000000E+01), where unit
= ˚C
[SENSe:]TEMPerature:RJUNction:SIMulated:AUTO
Sets junction reference temperature of thermocouple measurement used by
simulation temperature or internal temperature of front panel.
Parameter: 0 | 1 | ON | OFF
Example: SENS:TEMP:RJUN:SIM:AUTO ON
Sets the thermocouple junction temperature used by internal temperature.
[SENSe:]TEMPerature:RJUNction:SIMulated:AUTO?
Returns thermocouple measurement which junction reference temperature
is selected.
Return Parameter: 0 | 1, 1= internal temperature, 0= simulation temperature
[SENSe:]TEMPerature:RJUNction:SIMulated:AUTO:OFFSet
Sets junction reference temperature adjust value of thermocouple
measurement which internal temperature is selected.
Parameter: <NRf> (-20.00 ~ 20.00) | MIN | MAX | DEF
Example: SENS:TEMP:RJUN:SIM:AUTO:OFFS 5
Sets the junction reference temperature adjust value to 5˚C
[SENSe:]TEMPerature:RJUNction:SIMulated:AUTO:OFFSet?
Returns junction reference temperature adjust value of thermocouple
measurement.
Return Parameter: <NRf> (-2.00000000E+01~+2.00000000E+01), where unit
= ˚C
[SENSe:]TEMPerature:RJUNction:SIMulated:AUTO:TEMPerature?
Returns internal temperature of thermocouple measurement.
Return Parameter: <NRf> (-5.50000000E+01~+1.25000000E+02), where unit
= ˚C
[SENSe:]TEMPerature:TCOuple:TYPE
Sets the thermocouple type.
Parameter: Type(J | K | N | R | S | T | B | E)
Example: SENS:TEMP:TCO:TYPE J
Sets the thermocouple to type J.