GW Instek GDM-906 Series - Page 303

REMOTE CONTROL
303
[SENSe:]TEMPerature:TCOuple:TYPE?
Returns the thermocouple type.
Return parameter: J | K | N | R | S | T | B | E
[SENSe:]TEMPerature:RTD:ALPHa
Sets the 2-wire RTD Alpha coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:RTD:ALPH 0.00385
[SENSe:]TEMPerature:RTD:ALPHa?
Returns the 2-wire RTD Alpha coefficient.
[SENSe:]TEMPerature:RTD:BETA
Sets the 2-wire RTD Beta coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:RTD:BETA 0.00495
[SENSe:]TEMPerature:RTD:BETA?
Returns the 2-wire RTD Beta coefficient.
[SENSe:]TEMPerature:RTD:DELTa
Sets the 2-wire RTD Delta coefficient.
Parameter: <NRf> (0.0~9.999999) | MIN | MAX | DEF
Example: SENS:TEMP:RTD:DELT 0.000568
[SENSe:]TEMPerature:RTD:DELTa?
Returns the 2-wire RTD Delta coefficient.
[SENSe:]TEMPerature:RTD:RESistance[:REFerence]
Sets the reference resistance (R0) of 2-wire RTD measurement.
Parameter: <NRf> (80.0~120.0) | MIN | MAX | DEF
Example: SENS:TEMP:RTD:RES:REF 100
[SENSe:]TEMPerature:RTD:RESistance[:REFerence]?
Returns the 2-wire RTD reference resistance (R0).
[SENSe:]TEMPerature:RTD:TYPE
Sets the 2-wire RTD sensor type.
Return parameter: Type(PT100 | D100 | F100 | PT385 | PT3916 | USER)
Example: SENS:TEMP:RTD:TYPE PT100
Sets the 2-wire RTD sensor to PT100
[SENSe:]TEMPerature:RTD:TYPE?
Returns the 2-wire RTD sensor type.
Return parameter: PT100 | D100 | F100 | PT385 | PT3916 | USER