OPERATION
127
AUTO
Page
View
Display
for
HOLD
TIME
Hold Time duration
The step being held
2. The PASS or FAIL indicator on the
front panel will also be lit. The
buzzer will sound when activated.
3. To repeat the AUTO test again,
press the START button.
4. To exit from the PASS HOLD
status, press the STOP button.
 When it is in STEP HOLD status, only the
START and STOP buttons can be pressed, all
other keys are disabled.
 If AFTER FAIL STOP is enabled, the STEP
HOLD action will be discarded when FAIL
judgment occurs.
To Next Page
Loading...
Need help?
General
