OPERATION
129
1. If After Fail Restart is set for an AUTO test, then
the tester will stop the whole AUTO test
immediately when a FAIL judgment of anyone of
the MANU steps occurs. And it is available to
press the START key to restart the AUTO test. See
page 99 for more details.
Normal
AUTO
Display
for AFTER
FAIL
RESTART
AUTO test stops in the
1st step immediately
AUTO
Page View
Display
for
AFTER
FAIL
RESTART
AUTO test stops in the
1st step immediately
2. The FAIL indicator on the front
panel will also be lit. The buzzer
will sound when activated.
3. When FAIL is displayed on-screen,
press the STOP button to return to
the READY status or press the
START key to restart the AUTO test.
When AFTER FAIL RESTART occurs, only the
START and STOP buttons can be pressed, all other
keys are disabled.
To Next Page
Loading...
Need help?
General
