Chapter 1 Introduction ProView 7000 Management
© 2011 Harmonic Inc. 17 ProView 7000 v.2.4, Rev. A
1.4.3 ProView 7000 Rear Panel
The rear panel of the ProView 7000 platform includes all of the required professional input
and output connectors. The AC connector and power switch are also located on the rear
panel as well as the GND lug for grounding the unit when installed in a rack. The rear panel is
provided in various configurations as required for different applications. See Appendix B,
Ports and Connectors for a description of the ports and connectors.
1.5 ProView 7000 Management
The ProView 7000 Platform provides a wide range of methods for local and remote
monitoring and management:
Local Front Panel Control
The ProView 7000 front panel provides an easy to use management interface using the large
LCD screen and intuitive controls.
Remote Element Management System (EMS)
The ProView 7000 EMS provides an extensive graphic user interface (GUI) for managing the
device.
Network Management System
The ProView 7000 platform provides monitoring access to Network Management Systems
using its SNMP agent.
ProView 7000 Redundancy
Use NMX management for redundancy to ensure continued service in the event that a device
malfunctions. You can use a single or multiple backup ProView 7000s to ensure continued
service with a single or multiple primary ProView 7000s. This feature is limited to the
management of up to 2 output ports, ASI or SDI.
NOTE: The devices must be identical in hardware configuration, port structure and license.
See the Harmonic NMX Installation/Setup Guide for operating instructions. NMX version 5.6
is required.
To Next Page
Loading...
