Harmonic ProView 7000 - Reception Menu

Chapter 5 Front Panel Interface Front Panel Root Menu
© 2011 Harmonic Inc. 149 ProView 7000 v.2.4, Rev. A
5.2.1 Reception Menu
Use the Reception menu to select a satellite input to configure or monitor.
To display the Reception menu:
❖ Navigate Root > 1 Reception.
The Reception menu is comprised of the satellite inputs:
1
■ SAT 1
■ SAT 2
■ SAT 3
■ SAT 4
Select a satellite input menu to configure or monitor.
Each satellite menu is comprised of the following menus:
■ Configuration – Use this menu to configure the reception parameters, see
5.2.1.1 Configuration Menu.
■ Status – Use this menu to monitor the reception status, see 5.2.1.2 Reception Status Menu.
TIP: The ProView 7000 reception management is equally performed using the EMS.
Refer to 4.5.2.2 DVB-S/S2 Input Port Properties for details.
5.2.1.1 Configuration Menu
Use the Configuration menu to configure the ProView 7000 reception parameters.
❖ Navigate Root > 1 Reception > SAT (no.) > 1 Configuration.
Each menu item displays a value setup screen.
Reception
1 SAT 1
2 SAT 2
3 SAT 3
4 SAT 4
1. Not all hardware configurations support 4 demodulator ports, see Appendix C on page 185.
SAT 1
1 Configuration
2 Status