Chapter 4 Element Management System (EMS) ProView 7000 Device Management
© 2011 Harmonic Inc. 53 ProView 7000 v.2.4, Rev. A
4.3.2 Device Communication Status
The communication state of the ProView 7000 EMS with a ProView 7000 device is shown by
the graphical display of the device icon in the Devices box. The alarm severity level is
indicated by the device icon LEDs. A list follows with the descriptions:
■ A device that is disconnected or not logged into is displayed in light gray.
■ A connected and communicating device with no alarms is displayed in full color and
the LEDs are green.
■ When a device is receiving a command from a Harmonic DMS server, DMS
displays next to the device icon.
■ When a device has a critical alarm then the LEDs are red.
■ When a device has a major alarm and no critical alarms then the LEDs are orange.
■ When a device has a warning alarm and no major or critical alarms then the LEDs are
yellow.
4.3.3 Device Management Functions
Managing a ProView 7000 device from the EMS includes the following actions:
■ Adding a New ProView 7000 Device
■ Connecting a Device
■ Log-In / Log-Out Control to the Device
■ Setting Up/Changing the Device Log-in Password
■ Displaying the Device Explorer Tab
■ Checking Device Connectivity (Pinging the Device)
■ Backing Up/Restoring the Device Configuration
■ Restoring the Factory/Default Device Access Passwords
■ Disconnecting a Device
■ Removing a Device
To Next Page
Loading...
