Harmonic ProView 7000 - Page 60

Chapter 4 Element Management System (EMS) ProView 7000 Device Management
© 2011 Harmonic Inc. 60 ProView 7000 v.2.4, Rev. A
3. Select a preset in the list.
4. Click Delete.
A confirmation dialog displays.
5. Click Yes.
Downloading Presets
Use the Download button to download a preset to your managing PC.
To download presets:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Select a preset in the list.
4. Click Download.
The file/folder dialog displays.
5. Select a destination folder for the preset files.
6. Click OK.
Uploading a Preset
Use the Upload button to upload a preset to a ProView 7000. Preset files which you upload
must have different names to those already in the ProView
7000.
To upload a preset:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Click Upload.
The file/folder dialog displays.
4. Select a preset file in the list.
5. Click OK.
A preset name dialog displays.
6. You can enter a different name to store this preset in the ProView 7000.
7. Click OK.
4.3.3.8 Backing Up/Restoring the Device Configuration
The Back Up / Restore Configuration dialog enables the EMS user to manage the
configuration of the ProView
7000 device.
This dialog enables the EMS user to back up the current device configuration and keep it for
future use, to restore a backed-up device configuration and to restore the factory default
device configuration.
When restoring a saved or factory/default configuration, make sure the current hardware and
licensed software of the device match the device configuration when the configuration was
backed up. If in doubt, consult Harmonic support.