Harmonic ProView 7000 - Page 59

Chapter 4 Element Management System (EMS) ProView 7000 Device Management
© 2011 Harmonic Inc. 59 ProView 7000 v.2.4, Rev. A
Creating a Preset
Use the Create button to create a preset file from the current configuration. The file length
limit is 32 characters.
To create a preset file from the current configuration:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Click Create.
4. Enter a name for the preset.
5. Click OK.
Activating a Preset
Use the Activate button to activate a preset in the ProView 7000. The device reboots when
you activate a preset.
To activate a preset:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Select a preset in the list.
4. Click Activate.
A confirmation dialog displays.
5. Click Yes.
Renaming a Preset
Use the Rename button to rename a preset. The file length limit is 32 characters.
To rename a preset:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.
3. Select a preset in the list.
4. Click Rename.
5. Enter the new preset name.
6. Click OK.
Deleting a Preset
Use the Delete button to delete a preset.
To delete a preset:
1. Select the device in the Devices box.
2. Select Tools > Manage Presets….
The Presets Management dialog displays.