Harmonic ProView 7000 - Device Properties

Chapter 4 Element Management System (EMS) Element Properties Configuration
© 2011 Harmonic Inc. 81 ProView 7000 v.2.4, Rev. A
4.5.1 Device Properties
The Device properties allows monitoring and setting ProView 7000 system level parameters.
To display the Device properties:
1. Select a device icon in the Devices box.
2. Click Properties on the EMS toolbar.
The Device Properties dialog displays with multiple tabs, each listing a specific group of
device parameters.
The following sections describe the parameters provided in each tab for monitoring and
configuring.
4.5.1.1 Network Properties
The Network properties tab provides the EMS user the ability to manage the following
parameters related to the ProView
7000 unit.
■ Set the IP address of the port.
■ Set the Mask address of the port.
■ Set the Gateway address of the port.
■ View the unit MAC Address.
■ View Auto negotiation status of the port.
■ View the traffic Speed of the port (in Mbps).
■ View the Duplex Mode.
■ Manage the Routing Tables – GbE In mode only.