Harmonic ProView 7000 - Figure 4-37: Decoding Channel Properties - Service Tab

Chapter 4 Element Management System (EMS) Element Properties Configuration
© 2011 Harmonic Inc. 118 ProView 7000 v.2.4, Rev. A
Figure 4–37: Decoding Channel Properties – Service tab
Video Parameters Tab
The Video parameters tab provides the EMS user the following information and set-up
capabilities:
General Video processing parameters:
■ Decoding Codec – selects the video decoding mode.
Options:
❑ Automatic
❑ MPEG-2
❑ H.264
■ Display Format – selects the video display format.
Options:
❑ SD
❑ HD
❑ Automatic