Hisense AHM-080HCDSAA - Checking of Controller (Hi-Therma Monobloc)

330
Troubleshooting
1.2.2.2
Checking of Controller (Hi-Therma Monobloc)
10
2
8
9
2
8-29:
● A Button
The mechanical button at the bottom of the controller body:
Long press for 3 seconds to shut down the unit;
Long press for 10 seconds to initialize the system conguration;
When alarming, short press the mechanical button to reset the alarm.
● B Display
1 LED
2 Outdoor Ambient
Temperature Display
3 Date Display
4 Time Display
5 Cycle1 Setting Display
6 Mode
7 Water Temperature
Attainment Rate Display
8 Rooms
9 Installation Service Mode
Display
10 Water Pressure Display
11 ECO
12 Simple Timer
13 Weekly Timer
14 Current Water Temperature
15 Water Temperature Setting
16 Favourite
17 Menu
18 Anti Freezing Operation Display
19 Water Module Electric Heater Operation
Display
20 Solar Operation Display
21 Compressor Operation Display(reserved)
22 Energy Monitoring Operation Display
23 Test Run Operation Display
24 Centralized Control Operation Display
25 Water Pump Operation Display
26 Boiler Operation Display
27 Defrost Operation Display
28 Auto Operation Display(reserved)
29 Quiet Operation Display