Hisense AHM-080HCDSAA - Removing the Expansion Vessel

454
Hi-Therma Monobloc System (AHZ-044/080HCDS1)
2.4.6.5
Removing the Expansion Vessel
 Remove the Upper cover, as explained in “2.3.1.1 Removing the Upper cover”
 Remove the service cover, as explained in “2.3.1. 2 Removing the Service cover”
 Remove the electrical box cover, as explained in “2.3.1.3 Removing the electrical box cover”
 Remove the Rear cover, as explained in “2.3.1.5 Removing the Rear cover”
 Remove the Valve cover, as explained in “2.3.1.6 Removing the Valve cover”
 Remove the Water pump, as explained in”2.3.6.5 Removing the Water pump”
Then,
1. Remove water pump support
2. 