18
General data
Indoor part
MODEL 44(2.0HP) 80(3.0HP)
Water heat exchanger
Type - Brazed plate
Material - Stainless steel
Transfer uids - R32 - H
2
O
Quantity - 1
Internal refrigerant volume L 0.45 0.57
Internal water volume L 0.61 0.76
Insulation material - EPS
Water pump
Model - Para 25-130/9-87/IPWM1-3; SHIMGE APM25-9-130
Type - Inverter
Control - PWM
Power supply - 1~ 230V 50Hz
Maximum head mwc 9.0
Maximum water ow m
3
/h 4.5
Maximum power input W 87
Piping
Water inlet inches G 1”
Water outlet inches G 1”
Inlet/outlet distance mm 130
Water auxiliary electric
heater
Material - ——
Power supply - ——
Maximum electric heater power kW ——
Regulated electric heater power
(step 1/ step 2/ step 3)
kW ——
Capillary thermostat - ——
Surface thermostat - ——
Water pressure sensor
Material AISI 304L(Stainless steel)
Pressure range 0-9.0Bar
Expansion vessel
Material - Steel (with stainless/galvanized steel connections)
Internal water volume L 8.0
Working pressure bar 3.0
Pre-loading pressure (Air side) bar 1.0±0.3
Shut-o valve with lter
Type - Isolated water strainer (Shut-o valve with lter)
Material - Brass
Piping connection in. 1”, DN25
Mesh (hole size) In. 30.0
Self-cleaning (with back ush) lter - Yes
Safety valve - Yes (3 bar)
Shut-o valve in. 1”, DN25
Air purge valve - Yes
Unit controller - Yes
To Next Page
Loading...
