66
Installation
(2)
provided with the unit. For convenience of repair and
indoor unit as follow.
Gas
Gaskets
Rubber gasket must be mounted (accompanied with the unit),
otherwise water leakage may be caused.
valves and drain valve, which are essential to maintenance.
(3) Additional water strainer
Provide a 50 mesh or more water strainer at the water inlet
through a narrow space between the plates. Therefore, there
is a possibility that freezing or corrosion may occur if foreign
This is not required when cooling mode is not used.
Water Strainer
(50 mesh or more recommended)
Water Flow Direction →
The water piping connection needs to be completed after
To Next Page
Loading...
