Section Page Description Edition
20.2.4 A/D
Converter
Characteristics
Table 20.27 A/D
Converter
Characteristics
554 12.5 MHz added
12.5 MHz 20 MHz
Item Min Typ Max Min Typ Max Unit
Resolution 101010 101010bit
Conversion time — — 11.2 — — 6.7 µS
Analog input capacitance — — 20 — — 20 pF
Permissible signal-source impedance — — 1 — — 1 kΩ
Nonlinearity error* ——±4.0 — — ±4.0 LSB
Offset error* ——±4.0 — — ±4.0 LSB
Full-scale error* ——±4.0 — — ±4.0 LSB
Quantization error* ——±0.5 — — ±0.5 LSB
Absolute accuracy — — ±6.0 — — ±6.0 LSB
Note: *Reference value
6
A.2.17 Timer Status
Registers 0–4
(TSR0–TSR4)
Table A.18 TSR0–
TSR4 Bit Functions
581 Bit amended
Bit Bit name Value Description
2 Overflow flag (OVF) 0 Clear conditions: 0 is written in OVF after
reading OVF = 1 (Initial value)
1 Set conditions: TCNT value overflows (H'FFFF
? H'0000) or underflows (H'FFFF ? H'0000)
1 Input capture/compare match
flag B (IMFB)
0 Clear conditions: 0 is written in IMFB after
reading IMFB = 1 (Initial value)
1 Set conditions: (1) When GRB is functioning as
the output compare register, and TCNT = GRB;
(2) When GRB is functioning as the input
capture register, and the TCNT value is
transferred to GRB by the input capture signal
0 Input capture/compare match
flag A (IMFA)
0 Clear conditions: 0 is written in IMFA after
reading IMFA = 1 (Initial value)
1 Set conditions: (1) When GRA is functioning as
the output compare register, and TCNT = GRA;
(2) When GRA is functioning as the input
capture register, and the TCNT value is
transferred to GRA by the input capture signal
6
A.2.23 Timer Output
Control Register
(TOCR)
Table A.24 TOCR
Bit Functions
587 Table amended
Bit Bit name Value Description
1 Output level select 4 (OLS4) 0 Reverse output of TIOCA3, TIOCA4, TIOCB4
1 Direct output of TIOCA3, TIOCA4, TIOCB4
(Initial value)
0 Output level select 3 (OLS3) 0 Reverse output of TIOCB3, TOCXA4, TOCXB4
1 Direct output of TIOCB3, TOCXA4, TOCXB4
(Initial value)
6
To Next Page
Loading...
