Hitachi SH7032 - Usage Notes; Non-Overlap Operation

332
11.4 Usage Notes
11.4.1 Non-Overlap Operation
During non-overlap operation, transfers from NDR to data registers (DR) occur as follows.
1. NDR contents are always transferred to DR on compare match A.
2. The contents of bits transferred from NDR are only transferred on compare match B when they
are 0. No transfer occurs for a 1.
Figure 11.9 illustrates TPC output during non-overlap operation.
CR
Q
NDER
Q
TPC output pin
Port function
select
DRQ
C
D NDRQD
Compare match A

Compare match B
Figure 11.9 TPC Output Non-Overlap Operation