HP 8753E - System Trace Noise for A;R Magnitude; System Trace Noise for A;R Phase; System Trace Noise for B;R Magnitude

. . . . . . . . . . .,.............
j_., ./_
4. Press CMarker F~“, ‘~~~~~~~~: ~~~~~~~~: to activate the
__........~.~............-........~~.~.~.~.~.~.~.~;.~ . . . . . . . I .._ .::: .._......
/.: . i~~L~.~.~.~.~zz&..~.~
c//.~.~._.~.~.~~~~~.~.~ . . . . i . . . . . . . . -..-.. i..
instrument’s statistic feature.
System Trace Noise for A/R Magnitude
7. When the analyzer displays the “Hld” annotation, press c-j
~~~‘:~~~~~~:
. . . . . . . . . . . . . . . . .
-
8. Write the sdev (standard deviation) value, which appears on the analyzer
display, on the “Performance Test Record. n
System Trace Noise for A/R Phase
9. press (format) ~~~~.
11. When the analyzer finishes the number of sweeps, press @8@
~~~~~~~;.
12. Write the sdev value on the “Performance Test Record.”
System Trace Noise for B/R Magnitude
15. When the analyzer l?nishes the number of sweeps, press c-1
16. Write the sdev value on the “Performance Test Record.”
2.66 System Verification and
Performance Tests