1
Service
Equipment
and
Analyzer
Options
‘lhble
of Service Test Equipment
‘Ihble
l-l. Required
‘Idols
T-8,
T-10,
T-15,
T-20,
and
T-25
TORX screwdrivers
Flat-blade screwdrivers-small, medium, and large
5/164nch open-end wrench (for SMA nuts)
2-mm
extended bit
allen
wrench
3/16,
5/16,
and
9/16-&h
hex nut drivers
5/164nch
open-end torque wrench (set to 10 in-lb)
2.5~mm
hex-key driver
Non-conductive and non-ferrous adjustment tool
Needle-nose pliers
Tweezers
Antistatic work mat with wrist-strap
Service Equipment and Analyzer Options
l-1
To Next Page
Loading...
