HP 8753E - PEEK;POKE Menu

PEEK/POKE Menu
m acceSS tl& menu, press Csystem_l ~~~:~~~~~~r, ~p.&@~~
:........: 2.: .: i::::::: ;;....~.~~~.~~.~;.;;~..::
,... ‘.
z . ../ ?Z<<<< . . . .../ ..:< .~_......; . . .
. . . A: . . . . . . . . . . . . . . . . . . . . . . . _.::
:Pmi~9@<,
allows you to edit the content of one or more
memory addresses The keys are described below.
Caution
The PEEK/POKE capability is intended for service use only.
~~~.~O~~
.:.;.. ,,
.._...._.....-........~.-.~..
- .._./. <..; /.A...
accesses any memory address and shows it in the
active entry area of the display. Use the front panel
knob, entry keys, or step keys to enter the memory
address of interest.
displays the data at the accessed memory address.
allows you to change the data at the memory
._
. . . . . C__.. _./ ., _
.z i ‘.’
. . . . . . . c=..
ad&ess accessed by the :~~~p~~,~.;~~~~~~::
softkey. Use the front panel knob, entry keys, or
step keys to change the data. The ASCC switch
must be in the “AIXER” position in order to poke.
resets or clears the memory where instrument states
y . . . . . .
... ..:
are stored. To do this, press ~~~~~~~~:.: (Preset.
1046 Service Key Menus and Error Messages