HP 8753E - 15. Test Port Receiver Phase Compression

15. Test Port Receiver Phase Compression
Specifications
CW Frequency lkst Port Phase1
300 kHz to 3 GHz Port 1 16”
3 GHz to 6 GHz2 Port 1 57.5”
300 kHz to 3 GHz Port 2 16”
3 GHz to 6 GHz2
Port 2 <7.5O
1 With 10 Hz IF bandwidth.
2 Only for analyzer with Option 006 - 30 kHz
tQ6GHZrsnge.
Required Equipment for 500 Analyzers
Cable, APC-7, 24-inch
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HP P/N 8120-4779
Required Equipment for 75 ohm Analyzers
Cable, 75 ohm, Type-N, 24inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP P/N 8120-2408
Anulgzer warmup time: 1 hour
Perform this test to verify the compression/expansion phase relationships of the
analyzer’s test port receiver samplers.
2.82 System Verification and
Performance Tests