Certificate of Calibration
Hewlett-Packard will issue a Certificate of Calibration for the product upon
successful completion of System
VeriEcation
or completion of the Performance
Tests. The Certificate of Calibration will include a
S@~T?Z
Attachment
if the
System Verification Procedure is used to
confirm
the System
SpeciEcations.
If the Performance Tests are used to
conErm
Instrument Specifications, the
CertiEcate
of Calibration will not include a System Attachment. The equipment
and measurement standards used for the tests must be
certiEed
and must be
traceable to recognized standards.
Note
If you have a measurement application that does not use all of
the measurement capabilities of the analyzer, you may ask your
local Hewlett-Packard Customer Service Center to verify only a
subset of the
speciEcations.
However, this creates the possibility
of making inaccurate measurements if you then use the analyzer
in an application requiring additional capabilities.
24
System
Verification and
Performance
Tests
To Next Page
Loading...
Need help?
General
