HP 8753E Service Manual

System Verification Cycle and Kit Re-certification
Hewlett-Packard recommends that you verify your network analyzer
measurement system every six months. Hewlett-Packard also suggests that
you get your verification kit re-certified annually. Refer to
HP 85029B r-mm
V’ttin Kit Operating and Seruice Manual for more information.
Note
The system veriEcation procedures can also apply to analyzers
with Option 075 (75 ohm analyzers) if minimum loss pads and
type-N (m) to APC-7 adapters are used.
Check to see how the veriEcation kit floppy disk is labeled:
n If your veriEcation disk is labeled HP 8753D Verification Data Disk, or
HP 8753D& HP 8753EVerificationDataDisk, you may proceed with the
system verification.
n If your veriEcation disk is not labeled as indicated above, you may send
your HP 85029B 7-mm veriEcation kit to the nearest service center for
recertiEcation, which includes a data disk that you can use with the
HP 8753E.
System Verification and
2-7
Performance Teete

HP 8753E Specifications

General

Brand	HP
Model	8753E
Category	Measuring Instruments
Language	English