HP 8753E - Test Port 1 Input Frequency Response from 3 Ghz to 6 Ghz

Test Port 1 Input Frequency Response from 3 GHz to 6 GHz
39. When the analyzer Gnashes the calibration sweep, connect the equipment as
shown in Figure 2-22.
HP 8753E
NETWORK ANALYZER
PORT 1
I I
PORT 2
U
CABLE
24 INCH
Figure 2-22. Setup for lkst Port 1 Input Frequency Response
. . . . . . . .
41.
_ . . . . . . . ..: . . . / / . .
Press I-1 ~~~~~~~ c-1 ~~~~ ~~~~~~~~.. to put
~~i..................~~~;;;~;~.i ._ i......./......l
/i_.......-......~r~i_i_
.: . . . . . . . . . ..L......... _...._.... . -::
marker 1 at the minimum magnitude location of the trace.
42.
:..... :.. .+:.:~ / . ..<..::.:, ‘;....~~~~~:.;~~~~~~~~~~~
Press 1-9 ~~~~~~ cm) ~~~~~ ~~~~~ to position
>>> . . . . . / . . . . . . . . . . . . . . . . . . . . . . . 2.2L../:: . . . . . . . . . . . 2 . . . . . . . ... .. . . . . . . . . .. . . . . . . .:::::.
. . . . . . ~;..................._......~..........._............-~... ::..... i.i.:::
marker 2 at the maximum magnitude location of the trace.
43. Write the marker 1 or marker 2 reading, whichever has the largest absolute
magnitude, in the “Performance Test Record. n
System Verification and 241
Performance Tests