HP 8753E - Test Port 2 Phase Compression

Test Port 2 Phase Compression
1. Connect the equipment as shown in
Figure 2-41.
HP 8753E
NETWORK ANALYZER
Figure 2-41. ‘Ikst Port Phase Compression ‘&St SetUP
11. Write the absolute value of the marker 2 reading in the “Measured Value”
coh,unn of the “Performance Test Record.”
12. Repeat steps 5 to 11 for the other CW frequencies listed for Port 2 in the
“Performance Test Record. *
System Verification and
2-83
Performance Tests