HP 8753E - 12. Test Port Input Impedance

12. Test Port Input Impedance
Specifications
1 Frequency Range 1 ‘Ilest Port Input 1 Return Loss 1
LkHzto 1.3GHzI Port 1
I IlSdB I
m3Grr Port2 1 116dB 1
r
3 GHz to 6 GHz
l
Port 2
I 114m I
Required Equipment for 50 ohm Analyzers
Cable, APC-7, 24-inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP P/N 8120-4779
Calibration Kit, 7-mm
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 85031B
Required Equipment for 75 ohm Analyzers
Cable, 750, Type-N, 24-inch
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HP P/N 8120-2408
Calibration Kit, 753, Type-N . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HP 85036B
Anulgm- warmup time: 1 hour
Perform this test to measure the return loss of each input test port.
2.72 System Verification and
Performance Tests