DEVICE:noton,notconnect,
wrong addrs
Error Number The device at the selected address cannot be accessedbythe
119
analyzer. Verify that the device is switched on, and check the
HP-IB connection between the analyzer and the device. Ensure
that the device address recognized by the analyzer matches the
HP-IB address set on the device itself.
DISK HARDWARE PROBLEM
Error Number The disk drive is not responding correctly. Refer to the disk
39
drive operating manual.
DISK MESSAGE LENGTH ERROR
Error Number The analyzer and the external disk drive aren’t communicating
190
properly. Check the HP43 connection and then try substituting
another disk drive to isolate the problem instrument.
DISK:noton,not
connected, wrong addrs
Error Number The disk cannot be accessed by the analyzer. Verify power to
38
the disk drive, and check the
HP-B3
connection between the
analyzer and the disk drive. Ensure that the disk drive address
recognized by the analyzer matches the HP-IB address set on
the disk drive itself.
1 O-52
Service Key Menus and Error Messages
To Next Page
Loading...
