200
S:\HP892XX\USRGUIDE\manual\callscrn.fb
Chapter 6, Call Processing Subsystem
CALL BIT Screen
[] Register
When lit, the Register annunciator indicates that the mobile station connected
to the Test Set is being commanded to register with the base station.
Release
This field is used to terminate an active voice channel connection to the mobile
station. When the
Release field is selected, a mobile station control message
with a release order is sent to the mobile station on the forward voice channel. A
mobile station must be actively connected on a voice channel to the Test Set (that
is, the
Connect annunciator must be lit) before you can attempt to send a release
order to the mobile station.
Set Message
This field is used to select the desired forward control channel or forward voice
channel message to be modified.
To Next Page
Loading...
