3-36
Troubleshooting
ESG Series Signal Generator Instrument-Specific Error Messages
Data corrupt or stale;EEPROM copy of
<filename>.
The EEPROM copy of a file is either corrupt or otherwise
unusable. The system automatically updates the non-volatile
RAM copy of the EEPROM copy using a default initialization.
The actual EEPROM file is left as it is. Report this problem to
the factory.
-231
Data questionable;RAM copy of <filename>.
Indicates that the non-volatile RAM copy of a file has a
correctable error. The system automatically performs the
correction. A potential cause is a failing backup battery.
Data questionable;EEPROM copy of <filename>.
Indicates that the EEPROM copy of a file has a correctable
error. The system automatically performs the correction. A
potential cause is a failing EERPOM. Report this problem to
the factory.
-241
Hardware missing; <card_name>
Indicates that a test communication to a hardware card failed.
The instrument is most likely not functional. Contact the
nearest HP Sales and Service office.
Hardware missing; Installed option boards do
not match configuration information.
Indicates that a set of option boards have been installed that do
not match the information that was given to the instrument as
part of the installation. If this is the result of a customer
installed option, the wrong option was specified during
installation. If this is seen at any other time, the likely cause is
an EEPROM failure on the option card.
To Next Page
Loading...
