137
9.3.12 Connecting gyro
By purchasing an optional item, NSK Unit NCT-4106, gyro and electromagnetic log can be
connected.
For connecting, use the CFQ-6998 dedicated cable of JRC that is enclosed by the NCT-4106 or the
CFQ-6934 optional cable.
NCT-4106 can be connected easily with the processing unit by using this cable.
And the NCT-4106 is built in the interface circuit for high capacity external buzzer contact output
(dry contact output), a big buzzer can be directly drived.
When CFQ-6998 (an enclosed cabel) is used
Photograph 1
Insert the 8-pin connector (IND)
of CFQ-6998 (unit dedicate
connection cable that is enclose
by the NCT-4106) to the
connector of processing unit J5.
Photograph 2
Insert the 8-pin connecto
(NSK) of CFQ-6998 (uni
dedicated connection cable tha
is enclosed by the NCT-4106)
to the connector of NCT 4106.
To Next Page
Loading...
