156
(b) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
RADAR , RADAR ADJUST , and CENTER FRQ , and press [JOG DIAL] or
[ACQ/ENT].
(c) Adjust the frequency by changing the value by turning [JOG DIAL] to the left or right, and
end the operation by pressing [JOG DIAL] or [ACQ/ENT].
ï¼£
ＣＣ
ＣＥ
ＥＥ
ＥＮ
ＮＮ
ＮＴ
ï¼´ï¼´
ï¼´ï¼¥
ＥＥ
ＥＲ
ＲＲ
ＲＦ
ＦＦ
ＦＲ
ＲＲ
ＲＱ
ＱＱ
ï¼±
0
00
00
00
06
66
63
33
3
3. Tuning indicator level adjustment
Set the scale when the tuning indicator bar has reached the maximum level.
Use the following procedure to adjust a tuning indicator level.
Use the following procedure to adjust a tuning indicator level.Use the following procedure to adjust a tuning indicator level.
Use the following procedure to adjust a tuning indicator level.
(a) Carry out steps from (a) to (c) of "1. Tuning preset".
(b) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
RADAR , RADAR ADJUST , and TUNE INDICATOR , and press [JOG DIAL] or
[ACQ/ENT].
(c) Adjust the indicator level by changing the value by turning [JOG DIAL] to the left or right
until the tuning indicator indicates 70% to 80% of the tuning indicator area, and end the
operation by pressing [JOG DIAL] or [ACQ/ENT].
ï¼´
ï¼´ï¼´
ï¼´ï¼µ
ＵＵ
ＵＮ
ＮＮ
ＮＥ
ＥＥ
ï¼¥
Ｉ
ＩＩ
ＩＮ
ＮＮ
ＮＤ
ＤＤ
ＤＩ
ＩＩ
ＩＣ
ＣＣ
ＣＡ
ＡＡ
ＡＴ
ï¼´ï¼´
ＴＯ
ＯＯ
ＯＲ
ＲＲ
ï¼²
0
00
00
00
06
66
63
33
3
To Next Page
Loading...
Need help?
General
