III
●
●●
●
Cautions to be used during operation
●
●●
●
The customer should refrain from inspecting or repairing the internal parts of
this equipment.
Inspection or repair other than by specialized service personnel may cause
death or a serious injury of any person.
Please contact the sales department of Japan Radio Co., Ltd. or your local
branch, outlet or sales office with respect to maintenance and repair.
When performing maintenance in increment weather, please be sure to shut
the main power off.
If maintenance work is performed without shutting the main power off, there
is a risk of dying or getting a serious injury of any person by electric shock.
When performing maintenance or inspection of the scanner unit, be sure to
shut off the main power source.
If the scanner suddenly rotates and it hits the human body violently, there is a
risk of dying or getting a serious injury of any person.
Be sure to shut off the main power source when approaching the scanner unit
for the purposes of maintenance or inspection.
If exposured to electric waves at proximate distances, there is a risk of dying or
getting a serious injury of any person.
High Voltage
Since some sections of the modulator (CME-322 or QME-323) generate a high
voltage of about 4000V, no one except service engineers are allowed to touch
inside of the modulator.
There is a risk of dying or getting a serious injury of any person by electric
shock.
When the above setting is set to OFF, microwaves are radiated even if the
scanner unit is not rotating, it may cause death or a serious injury of any
person. Therefore, utmost care is necessary.
Make the setting is set ON after the required operation is completed.
To Next Page
Loading...
Need help?
General
