176
POSITION N 36°36.000'
E136°36.000'
ANTENNA HEIGHT 10M
GEODETIC DATUM WGS-84
FIX MODE AUTO
HDOP LEVEL 10
AVERAGE MANUAL 2S
EXCLUDE SAT 00 00 00
TX COMMAND 00 00 00
TRANSMIT…
COMPLETE!
GPS SETTING
10. Setting UTC time [MENU]
This function sends UTC (world time) to a GPS receiver.
Use the following procedure to set the UTC setting to a GPS receiver.
Use the following procedure to set the UTC setting to a GPS receiver.Use the following procedure to set the UTC setting to a GPS receiver.
Use the following procedure to set the UTC setting to a GPS receiver.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
GPS , GPS SETTING2 , UTC and press [JOG DIAL] or [ACQ/ENT].
(b) When the following menu is displayed, change the values set in the year, month, day, hour,
minute, and second in that sequence using [JOG DIAL], determine each change by
pressing [JOG DIAL] or [ACQ/ENT] and end the operation.
UTC 2003/01/23
2003/01/23 23:59:59
23:59:59 +00:00
TX COMMAND
GPS SETTING2
11. Setting a UTC time difference [MENU]
This function sends a time difference with UTC (world time) to a GPS receiver.
Use the following procedure to set the time diffe
Use the following procedure to set the time diffeUse the following procedure to set the time diffe
Use the following procedure to set the time difference with UTC to a GPS receiver.
rence with UTC to a GPS receiver.rence with UTC to a GPS receiver.
rence with UTC to a GPS receiver.
(a) Display the INSTALLATION menu by pressing the [MENU] key in long mode, select
GPS , GPS SETTING2 , TIME DIFF. and press [JOG DIAL] or [ACQ/ENT].
(b) When the following menu is displayed, set a time difference by changing the values by
turning [JOG DIAL] and end the operation by pressing [JOG DIAL] or [ACQ/ENT].
UTC 2003/01/23
23:59:59
TIME DIFF. +00:00
+00:00
GPS SETTING2
12. Sending updated setting values [MENU]
This function sends setting information of items 10 and 11 to GPS to a GPS receiver.
The setting values of items 10 and 11 are not set in the GPS receiver without this transmission
operation, even if they are changed and set on the menu.
To Next Page
Loading...
