39
SELECT YOUR LANGUAGE
表示言語を選んでください
ENGLISH
NORSK
FRANCAIS
ESPANYOL
ITALIANO
DANISH
日本語
LANGUAGE SELECTION
言語選択
(b) When the language selection menu is displayed, select the target language using [JOG
DIAL], and then press the [JOG DIAL] or [ACQ/ENT] key. The message is displayed
asking if you want the selected language. If the selected language is the right one, press
the [JOG DIAL] or [ACQ/ENT] key again. The system starts with the selected language.
YOUR SELECT IS
ENGILISH
ARE YOU SURE?
選択された言語は英語です
英語です
宜しいですか？
NO
YES
LANGUAGE SELECTION
言語選択
3.3.4 Setting the volume of the buzzer [ALARM ACK]
Set the volume of sound emitted when the key is pressed or an alarm is issued.
(a) Hold down the [ALARM ACK] key to display the ALARM menu.
(b) Select BUZZER , and then press the [JOG DIAL] or [ACQ/ENT] key.
(c) The menu below is displayed. Set a volume with a value 0 to 255 by turning [JOG DIAL],
and then press the [JOG DIAL] or [ACQ/ENT] key.
Caution
●
●●
● Be careful that if the volume of the buzzer is set to 0 or a value not high enough,
you may not hear the buzzer when an alarm is issued.
VOLUME 255
255
BUZZER
To Next Page
Loading...
Need help?
General
