35
Chapter 3 Operation Procedures
3.1 Operation Flow
Power-on and start
▼
Tuning
▼
Observation and image adjustment
▼
Data acquisition and measuring
▼
Operation termination and stop
This chapter explains operations roughly divided into the following:
- Power-on operation
- Basic operation
- General operation
- Function key operation
Power-on operation must be set before this radar is turned on/off or the equipment is operated.
Basic operation is the minimum operation for operating the radar.
General operation is necessary for customizing the settings used with basic operation to best suit
your needs or for using more useful functions.
Function key operation is necessary for storing the settings determined through general
operation by the user or for implementing more advanced usage.
The following explains each basic operation:
To Next Page
Loading...
