XV
6. Using EBL2 as a floating EBL ···········································································52
7. Setting EBL display····························································································53
3.5.7 Changing the bearing presentation method of the PPI screen [AZI MODE]·········54
3.5.8 Changing the center of the PPI screen [OFFCENT]··············································55
1. Setting a position to which the center is moved ················································55
2. Canceling the position as the new center··························································55
3. Continuously moving the center ········································································56
4. Canceling the position as the new center··························································56
3.5.9 Using the trail display function [TRAILS] ································································56
1. Setting the trail display function to ON/OFF [TRAILS]······································56
2. Setting a trail interval [TRAILS]··········································································57
3. Clearing stored trail data [TRAILS]····································································57
4. Setting a trail reference level (trail threshold) [TRAILS] ····································57
5. Setting a trail storage suppression distance [TRAILS]······································58
6. Setting a range trail storage [TRAILS]·······························································58
3.5.10 Using the target expansion function [MENU] ·························································59
1. Setting the target expansion function ································································59
2. Canceling the target expansion function ···························································59
3.5.11 Changing the transmitter pulse length [GAIN/PL] ··················································59
Changing the pulse length ······················································································60
3.5.12 Using the zoom function [MENU] ···········································································60
1. Setting the zoom function ··················································································60
2. Canceling the zoom function ·············································································60
3.5.13 Highlighting a target by decreasing unnecessary noise (image processing) [MENU] ·······61
1. Setting image processing [MENU] ····································································61
2. Canceling image processing [MENU] ·······························································62
3. Setting an image processing range [MENU]·····················································62
3.5.14 Switching true/relative motion display [TM/RM] ·····················································63
1. Switching the motion mode ···············································································63
2. Resetting own ship's position in true motion display (TM) ································63
3.5.15 Suppressing the power consumption of the radar [MENU] ···································65
1. Using the intermittent transmitting function [MENU] ·········································65
2. Canceling the intermittent transmitting function [MENU] ··································65
3. Setting the period of the transmitting state (the number of antenna rotations) [MENU] ·······65
4. Setting the period of the standby state [MENU]················································66
3.5.16 Monitoring the heading of other ships (targets) [ALARM ACK] ·····························67
1. Using the radar alarm [ALARM ACK]································································67
2. Canceling the radar alarm function····································································67
3. Creating a radar guard zone [ALARM ACK] ·····················································67
4. Setting a radar guard zone [ALARM ACK]························································68
5. Setting a radar guard zone detection level [ALARM ACK] ·······························68
3.5.17 Resetting an alarm (stopping a warning) [ALARM ACK] ·······································69
3.5.18 Displaying parallel line cursors [MENU], [VRM], [EBL] ··········································69
3.5.19 Using the MOB function [MOB]···············································································70
1. Displaying the MOB mark··················································································70
To Next Page
Loading...
Need help?
General
