18
(15) [TRAILS] key
Short mode :
Switches to time track/continuous track/time track + continuous track/non-display.
Long mode : Displays a track menu (track erase, track time setting change, and so on).
(16) [CSR POS] key
Short mode : Outputs the information of the bearing and distance from the current own
ship's position to cursor position. It is output by the serial communication from
the RS232C port.
Long mode : Outputs the information of the bearing and distance when the cursor is the own
ship's position. It is output by the serial communication from the RS232C port.
(Outputs "distance = 0NM", "bearing=0 degree").
(17) [+RANGE-] key
Short mode : Switches the range (+: range up, -: range down).
Long mode : Switches the continuous range (+: continuously range up, -: continuously range
down)
* When the [+RANGE-] key is pressed while the zoom function is ON, the zoom function is
automatically released.
(18) [ACQ/ENT] key
Short mode : Target capture
Long mode : ACQ mode menu
(19) [MENU] key
Short mode : Set a menu to ON/OFF.
Long mode : Set an initialization menu to ON/OFF
* Initialization refers to the settings made at installation.
To Next Page
Loading...
