• Junos OS Interfaces Fundamentals Configuration Guide
• Junos OS Ethernet Interfaces Configuration Guide
[edit interfaces ae] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces
ae] hierarchy level on EX Series switches.
•
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
•
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
•
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
•
Supported Statements in the [edit interfaces ae] Hierarchy Level on page 109
•
Unsupported Statements in the [edit interfaces ae] Hierarchy Level on page 113
Supported Statements in the [edit interfaces ae] Hierarchy Level
The following hierarchy shows the [edit interfaces ae] configuration statements supported
on EX Series switches.
interfaces {
aeX {
accounting-profile name;
aggregated-ether-options {
ethernet-switch-profile {
tag-protocol-id identifiers;
}
(flow-control | no-flow-control);
lacp {
(active | passive);
link-protection {
disable;
(revertive | non-revertive);
}
periodic interval;
system-priority number;
}
(link-protection | no-link-protection);
link-speed speed;
local-bias;
(loopback | no-loopback);
minimum-links number;
rebalance-periodic;
}
description text;
109Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements