lacp (802.3ad)
Syntax lacp {
force-up;
port-priority
}
Hierarchy Level [edit interfaces interface-name ether-options 802.3ad]
[edit interfaces aeX aggregated-ether-options]
[edit chassis aggregated-devices ethernet]
Release Information Statement introduced in Junos OS Release 10.0 for EX Series switches.
Support for LACP link protection introduced in Junos OS Release 11.4 for EX Series
switches.
Description Configure the Link Aggregation Control Protocol (LACP) parameters for aggregated
Ethernet interfaces on the global level (for all the aggregated Ethernet interfaces on the
switch) or for a specific aggregated Ethernet interface.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
• Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
• Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
• Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
• Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
• Understanding Aggregated Ethernet Interfaces and LACP on page 8
• Junos OS Ethernet Interfaces Configuration Guide
197Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements