Juniper EX2200 Hardware Guide

member (Interface Ranges)
Syntax member interface-name;
Hierarchy Level [edit interfaces interface-range interface-range-name]
Release Information Statement introduced in Junos OS Release 10.0 for EX Series switches.
Description Specify the name of the member interface belonging to an interface range on the EX
Series switch.
Options interface-name—Name of the interface.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Gigabit Ethernet Interfaces (CLI Procedure)
• Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
• Understanding Interface Ranges on EX Series Switches
• Understanding Interface Ranges on EX Series Switches on page 24
• EX Series Switches Interfaces Overview on page 3
• Junos OS Interfaces Fundamentals Configuration Guide
Copyright © 2015, Juniper Networks, Inc.206
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g