Juniper EX2200 - Table 6: Ipv4 and Ipv6 Hashing Fields

Table 6 on page 13 displays the IPv4 and IPv6 payload fields that are used by the hashing
algorithm, by default.
•
✓—Field is used by the hashing algorithm, by default.
•
Χ—Field is not used by the hashing algorithm, by default.
•
(configurable)—Field can be configured to be used or not used by the hashing algorithm.
Table 6: IPv4 and IPv6 Hashing Fields
QFX5100EX4300Fields
ECMPLAGECMPLAG
ΧΧΧΧSource MAC
ΧΧΧΧDestination MAC
ΧΧΧΧEtherType
Χ
(configurable)
Χ
(configurable)
Χ
(configurable)
Χ
(configurable)
VLAN ID
✓
(configurable)
✓
(configurable)
✓
(configurable)
✓
(configurable)
Source IP or IPv6
✓
(configurable)
✓
(configurable)
✓
(configurable)
✓
(configurable)
Destination IP or IPv6
✓
(configurable)
✓
(configurable)
✓
(configurable)
✓
(configurable)
Protocol (IPv4 only)
✓
(configurable)
✓
(configurable)
✓
(configurable)
✓
(configurable)
Next header (IPv6 only)
✓
(configurable)
✓
(configurable)
✓
(configurable)
✓
(configurable)
Layer 4 Source Port
✓
(configurable)
✓
(configurable)
✓
(configurable)
✓
(configurable)
Layer 4 Destination Port
ΧΧΧΧIPv6 Flow label (IPv6 only)
13Copyright © 2015, Juniper Networks, Inc.
Chapter 1: Interfaces Overview