Juniper EX2200 - Vlan-Tagging

vlan-tagging
Syntax vlan-tagging;
Hierarchy Level [edit interfaces interface-name],
[edit logical-systems logical-system-name interfaces interface-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Statement introduced in Junos OS Release 13.2 for PTX Series Routers.
Description For Fast Ethernet and Gigabit Ethernet interfaces, aggregated Ethernet interfaces
configured for VPLS, and pseudowire subscriber interfaces, enable the reception and
transmission of 802.1Q VLAN-tagged frames on the interface.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring Layer 3 Subinterfaces for a Distribution Switch and an Access
Switch
• Example: Configuring BGP Autodiscovery for LDP VPLS
• Configuring a Layer 3 Subinterface (CLI Procedure) on page 97
• Configuring Tagged Aggregated Ethernet Interfaces on page 96
• Configuring Interfaces for VPLS Routing
• Enabling VLAN Tagging
• 802.1Q VLANs Overview on page 26
• vlan-id on page 228
229Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements