Juniper EX2200 - Supported Statements in the [Edit Interfaces Interface-Range] Hierarchy; Level; Unsupported Statements in the [Edit Interfaces Interface-Range] Hierarchy

This topic lists:
•
Supported Statements in the [edit interfaces interface-range] Hierarchy
Level on page 126
•
Unsupported Statements in the [edit interfaces interface-range] Hierarchy
Level on page 129
Supported Statements in the [edit interfaces interface-range] Hierarchy Level
The following hierarchy shows the [edit interfaces interface-range] configuration
statements supported on EX Series switches.
interfaces {
interface-range name {
accounting-profile name;
aggregated-ether-options {
ethernet-switch-profile {
tag-protocol-id identifier ;
}
(flow-control | no-flow-control);
lacp {
(active | passive);
admin-key key;
periodic interval;
system-id mac-address;
}
(link-protection | no-link-protection);
link-speed speed;
(loopback | no-loopback);
minimum-links number;
rebalance-periodic;
source-address-filter filter;
source-filtering | no-source-filtering;
}
description text;
disable;
ether-options {
802.3ad {
aex;
(backup | primary);
lacp {
force-up;
}
}
(auto-negotiation | no-auto-negotiation);
(flow-control | no-flow-control);
(loopback | no-loopback);
}
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
link-mode mode;
member interface-name;
member-range starting-interface name to ending-interface name;
mtu bytes;
native-vlan-id
Copyright © 2015, Juniper Networks, Inc.126
Network Interfaces for EX4300 Switches