Juniper EX2200 - Chapter 18 Power and Electrical Safety Information; General Electrical Safety Guidelines and Warnings

interface-range
Syntax interface-range name {
accounting-profile name;
description text;
disable;
ether-options {
802.3ad {
aex;
(backup | primary);
lacp {
force-up;
}
}
(auto-negotiation | no-auto-negotiation);
(flow-control | no-flow-control);
ieee-802-3az-eee;
link-mode mode;
(loopback | no-loopback);
speed (auto-negotiation | speed);
}
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
member interface-name;
member-range starting-interface name to ending-interface name;
mtu bytes;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile name;
bandwidth rate;
description text;
disable;
family family-name {...}
proxy-arp (restricted | unrestricted);
(traps | no-traps);
vlan-id (VLAN Tagging and Layer 3 Subinterfaces) vlan-id-number;
}
vlan-tagging;
}
Hierarchy Level [edit interfaces]
Release Information Statement introduced in Junos OS Release 10.0 for EX Series switches.
Description Group interfaces that share a common configuration profile.
NOTE: You can specify interface ranges only for Gigabit and 10-Gigabit
Ethernet interfaces.
193Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements