Juniper EX2200 Hardware Guide

Table 38: Unsupported [edit interfaces me] Configuration Statements for EX Series
Switches (continued)
HierarchyStatement
[edit interfaces me unit family inet address]vrrp-group
[edit interfaces me unit family inet6]service
[edit interfaces me unit family inet6 address]vrrp-inet6-group
Related
Documentation
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches•
• [edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108
[edit interfaces vme] Configuration Statement Hierarchy on EX Series Switches
This topic lists supported and unsupported configuration statements in the [edit interfaces
vme] hierarchy level on EX Series switches.
•
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
•
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
•
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
•
Supported Statements in the [edit interfaces vme] Hierarchy Level on page 144
•
Unsupported Statements in the [edit interfaces vme] Hierarchy Level on page 147
Supported Statements in the [edit interfaces vme] Hierarchy Level
The following hierarchy shows the [edit interfaces vme] configuration statements
supported on EX Series switches.
interfaces {
vme {
accounting-profile name;
description text;
disable;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
hold-time up milliseconds down milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
Copyright © 2015, Juniper Networks, Inc.144
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g