Juniper EX2200 Hardware Guide

device-count
Syntax device-count number;
Hierarchy Level [edit chassis aggregated-devices ethernet (Aggregated Devices)]
Release Information Statement introduced in Junos OS Release 9.0 for EX Series switches.
Range updated in Junos OS Release 9.5 for EX Series switches.
Description Configure the number of aggregated Ethernet logical devices available to the switch.
Options number—Maximum number of aggregated Ethernet logical interfaces on the switch.
Range: 1 through 32 for EX2200, EX3200, and standalone EX3300 switches and for
EX3300 Virtual Chassis
Range: 1 through 64 for standalone EX4200, standalone EX4500, and EX6200 switches
and for EX4200 and EX4500 Virtual Chassis
Range: 1 through 239 for EX8200 Virtual Chassis
Range: 1 through 255 for standalone EX8200 switches
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
• Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
• Junos OS Network Interfaces Configuration Guide
167Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g