Juniper EX2200 Hardware Guide

member-range
Syntax member-range starting-interface-name to ending-interface-name;
Hierarchy Level [edit interfaces interface-range interface-range-name]
Release Information Statement introduced in Junos OS Release 10.0 for EX Series switches.
Description Specify the names of the first and last members of a sequence of interfaces belonging
to an interface range.
Options Range: Starting interface-name to ending interface-name—The name of the first member
and the name of the last member in the interface sequence.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring Gigabit Ethernet Interfaces (CLI Procedure)
• Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
• Understanding Interface Ranges on EX Series Switches
• Understanding Interface Ranges on EX Series Switches on page 24
• EX Series Switches Interfaces Overview on page 3
• Junos OS Interfaces Fundamentals Configuration Guide
207Copyright © 2015, Juniper Networks, Inc.
Chapter 3: Configuration Statements

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g