Juniper EX2200 Hardware Guide

test interface restart-auto-negotiation
Syntax test interface restart-auto-negotiation interface-name
Release Information Command introduced in Junos OS Release 7.6.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Restarts auto-negotiation on a Fast Ethernet or Gigabit Ethernet interface.
Options interface-name—Interface name: fe-fpc/pic/port or ge-fpc/pic/port.
Required Privilege
Level
view
List of Sample Output test interface restart-auto-negotiation on page 326
Output Fields Use the show interfaces extensive command to see the state for auto-negotiation.
Sample Output
test interface restart-auto-negotiation
user@host> test interface restart-auto-negotiation fe-1/0/0
Copyright © 2015, Juniper Networks, Inc.326
Network Interfaces for EX4300 Switches

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g