Juniper EX2200 Hardware Guide

LACP protocol: Receive State Transmit State Mux State
node1:xe-0/0/1FUP Current Fast periodic Collecting
distributing
node2:xe-0/0/2 Current Fast periodic Collecting
distributing
node1:xe-0/0/1 (active) Current Fast periodic Collecting
distributing
node2:xe-0/0/2 (standby) Current Fast periodic WAITING
325Copyright © 2015, Juniper Networks, Inc.
Chapter 5: Operational Commands

Juniper EX2200 Specifications

General

Throughput	77 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Number of VLANs	1024
Networking standards	-
Switch type	Managed
SFP module slots quantity	4
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports quantity	48
Stackable	No
Product color	Black
Power consumption (typical)	100 W
Operating altitude	0 - 3048 m
Non-operating altitude	0 - 4877 m
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	0 - 95 %
Operating relative humidity (H-H)	10 - 85 %

Weight and Dimensions

Depth	254 mm
Width	441 mm
Height	43 mm
Weight	3600 g